RELEASE: WatchMon toolkit 2.0.12

Download setup at WatchMonToolkitInstaller_2.0.12g.msi

New Features

  • CellMon group "slave mode" functionality, presets, validation, and entire node range verse local range.


  • Store / Recover cell metrics for Bypass Session Ah, Lifetime Ah, lifetime Elapsed Hr and Initial Bypass Date.
  • Add LeafMon to CellMon types and appropriate defaults.
  • Node Chart for Cell voltage to rounded to 2 decimal places to avoid flicker, on telemetry reported to 3 decimal places.
  • Op status LED is cleared to amber prior to user restart and critical off event.


  • CANbus fix RX statistics.
  • Node statistics detect missing settings.
  • Detect changes to the Bypass Amps.
  • Correctly display Input 6 status checkbox on hardware expansion board.

WatchMonPlus WM5 related

  • Fix voltage cell filter for 5/6 and 10/11 to prevent flicker from bypass on the adjacent cell.
  • Update frequency of bypass temperature readings.
  • Network Tester, LED ID, Device Sync and Bypass Tester are disabled.
  • Temporarily disabled balancing prior to user restart and critical off event.
  • Limited bypass amp to max setup.

Alternative release notes

Previous release (software 2.0.11)
Next release (software 2.0.13)

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us