RELEASE: WatchMon toolkit 1.0.25

Download setup at WatchMonToolkitInstaller_1.0.25.msi

Software 1.0.25 - firmware 1.37

Includes both 1.0.25 and 1.0.24

New Features

  • Wizard setup to auto populate all screens with Hardware / Control defaults settings .
  • CellMon bypass extra adjustment modes for low volt cutout, footer status icon when re-balancing. New method to check when cells are the same voltage for extended periods (1 min) and not require a shunt. Record recent time stamp events.
  • Voice Player - configurable telemetry oral speaker for key stats with alternative voices, rate and volume settings, handy when not able to look at the display whilst testing.


  • Snapshot report now includes extra scheduling options (4hr, 1hr, 15min, 5min), additional fields, also warns if not all the telemetry data has been collected
  • Include Eltek 2000HE/48 charger to canbus protocol integration.
  • Main Chart now includes tool tip for cell volt, temperature and bypass amperes.
  • Redirect Help / Support Icon's to primary website away from zendesk.
  • Status footer icons to warn if connection version is a mismatch, and re-sequence to improve visibility.
  • Expansion hardware includes WatchmonCMC template, contactor sensor status and analogue input reading.


  • Correctly round default targets for Control Critical, Charging and remote screens
  • Ensure system operating status is not in timeout when there is no shunt
  • Session History allow direct reference access via GO
  • Lifetime history reset all counters .
  • Bypass tester to handle longer cell series network and report overall stats.
  • Shunt setup - idle Charge / Discharge thresholds can be saved.

Alternative release notes

Previous release (software 1.0.24)
Next release (software 1.0.26)

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us