RELEASE: WatchMon toolkit 1.0.22
Download the setup via WatchMonToolkitInstaller_1.0.22.msi
Software 1.0.22 - firmware 1.34
- Idle bypass functionality to automatically equalise if more that 0.01v different
- Technician Authorisation mode optional to limit setup changes (last 15 mins)
- Snapshot Report to log live readings on daily, adhoc, bypass complete and critical events (to support diagnostics rather than sending screen shots of software).
- For charging control include Bypass Session logic.
- Show user warnings when accessing technician setup screens.
- Wifi functionality
- Join AP (Access Point) method
- Add disable mode to reduce power consumption.
- Expand remote status flags 1 & 2 for total of 8 bytes for Charge / Discharge
- Control remote status activity monitoring
- Display CANbus rx / tx ticks
- Dialog to display actual flags 1 / 2 in hex, float, etc
- Add Theme / Style customisation to Toolkit software
- Bulk Import now includes Lifetime metrics.
- Solax inverter revisions to canbus messages.
- Brusa charger to adopt base address from integration setup.
- SMA to adopt additional status flags.
- Shunt status to correctly handle Charge / Discharge and Idle
- Shunt voltage presets for 3K & 4K external resistors for 600V and 750V
- Cellmon "Bypass Amp" calculates for cellmon impedance and bypass voltage threshold
- Bypass amp limit target adjusted based on CellMonType and power level
- System LED indicator reflects current operating state