RELEASE: WatchMon toolkit 1.0.17

Download the setup via WatchMonToolkitInstaller_1.0.17.msi

Software 1.0.17 - firmware 1.29

New Features

  • Backup setup, add file backup of device setup to my documents.
  • NeoPixel display, add external Soc% indicator for 8 segment addressable LED.


  • Software Installer now adopts signed company certificate for app and installer.
  • Add Bypass thermal relief function for charging.
  • Display power rate state / calc for Charge / Discharge.
  • Add manual limited power mode for Charge / Discharge.
  • Revise native canbus Charge / Discharge status message flags.
  • Revise control VoltView screen to show both normal and limited power remote targets
  • Add sounds when saving / error to hardware / control setup screens


  • When monitoring Run Idle / Charge input take immediate effect if disabled
  • When bypass achieves completion stop charging session.
  • Ensure that SoC% modifications refresh state from device. 
  • Revise control logic for Charge / Discharge to ensure transition times for Norm / Limp / Off

Alternative release notes

Previous release (software 1.0.16)
Next release (software 1.0.18)

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us