Sendyne SPF102MOD

The Sendyne SPF102MOD was used with WatchMon1 but Sendyne ceased making this device.  

IF YOU ALREADY HAVE ON IT IS NOT COMPATIBLE WITH LATER WATCHMON

Sendyne SPF102MOD shunt 375A peak

Discontinued: Our supplier has ceased producing this item

The Batrium Shunt is a shunt-based precision current measurement module. The module is designed to achieve an accuracy of ±1.0 % for current measurement over the whole operating temperature range of –40 °C to +125 °C.

Characteristics:

  • 100 µOhm shunt
  • ± 200 A continuous
  • ± 375 A peak
  • 150 V voltage measurement

Features: 

  • Turnkey solution for use in the field 
  • Typically achieves ±1.0 % accuracy of current measurement 
  • Accurate voltage measurement with flexible range 
  • Accurate temperature measurements 
  • Resolves currents from 3 mA to 500A 
  • Automotive temperature range of –40 °C to +125 °C 
  • Low power consumption 
  • Galvanically isolated communication
  • Isolated front end for “high” or “low” side current sensing and attenuation of system-induced noise
  • Built-in calibration for current measurements
  • Built-in compensation for resistance dependence of the shunt on temperature
  • Built-in calibration for voltage measurements
  • Temperature reporting in degrees Celsius
  • Total coulomb counters

Alternate shunts are available for those who wish to measure smaller or higher currents.

Instructions for assembly

Sendyne data sheet showing more information the module 
Sendyne_SFP102MOD_Product_Brief_V1.1.pdf

Still need help? Contact Us Contact Us