Expansion Output Functions

Setting Definition
None No Function selected
Manual On Force relay switch to ON
CriticalBattOK On when in Critical Battery OK mode. 
Batt happy -ON            Critical - OFF

Charging On ON when charging is on

Discharging On

ON when discharging is on



Heating Required ON when Heating required

Cooling Required ON when Cooling required

Run/Idle input Used for EV mostly combination of Discharging and Critical to protect from
over-discharging
Charge/Normal input Used for EV mostly combination of Charging and Critical to protect from overcharging
Bypass Complete ON when all cell monitors have gone into bypass mode
Charging Limited ON when Charging Limited
Discharging Limited ON when Discharging Limited
Critical Recovery Setup to suit requirements of specific customer  Do Not Use
Critical Pulse On 200ms pulse sent Reverse logic of Critical Pulse OFF
Critical Pulse Off 200ms pulse sent when Critical State turns to OFF used to trigger Circuit Breakers
Critical Fault

Reverse logic of Critical Battery OK
Batt happy - OFF            Critical - ON
Critical Precharge Timer Circuit is 2 seconds - pulse relay for 2 seconds to pre-charge
and it does not spark
Fluid pump required ON when either Heating or Cooling is required
Strip cycle discharge Setup to suit requirements of specific customer  Do Not Use
Strip cycle isolate Setup to suit requirements of specific customer  Do Not Use
Warning HVA charge CV2 breached
Warning LVA discharge CV11 breached
Charging Remote Running ON based on control logic in remote tab.
Charging Off Reverse logic of Charging ON
Discharging Off Reverse logic of Discharging ON
Bypass Running ON if any of the cell monitors in bypass
Undefined Setup to suit requirements of specific customer  Do Not Use

Still need help? Contact Us Contact Us